Description
This kit, enhanced with a full-carbon plate, is ideal for Kite-Foil, in particular for Freeride and Freestyle . The high lift make it a good choice also for beginners who wants to try Kite-Foil in low-moderate winds.
Thanks to the Kraken Modular System connection system, maximum compatibility with all components of the same SABFOIL range is guaranteed, so that you can change your setup at any time, without any problems.
The kit C93699K consists of:
- Mast: M93K – 930 mm
- Front Wing: W699- 850 cm2
- Stabilizer: S430 – 240 cm2
- Fuselage: F703K – 703mm
- Mast Plate: CP02K
It is possible to upgrade your kit thanks to the Quick Release System (Q01K) patented by SABFOIL and sold separately. Thanks to it you can assemble and disassemble your hydrofoil in a few seconds, avoiding at the same time losing the configuration on the board.
Dimensions & Advanced specs
| Mast – Height | 930 mm |
|---|---|
| Front Wing – Span | 699 mm |
| Front Wing – Surface | 850 cm2 |
| Front Wing – Root Chord | 170 mm |
| Front Wing – Aspect Ratio | 5.75 |
| Stabilizer – Span | 430 mm |
| Stabilizer – Surface | 240 cm2 |
| Stabilizer – Root Chord | 68 mm |
| Stabilizer – Aspect Ratio | 7.7 |
| Fuselage – Length | 703 mm |
| Foil Set – Weight [±5%] | |
| Board Connection Type | Carbon Plate |
Content
Carbon Mast 93 cm x 1M93K
Front Wing 699 – 880 cm2 x 1W699
Stabilizer 430 – 240 cm2 x 1S430
Fuselage 703 – Kraken Modular System x 1F703K
Full-Carbon Kraken Plate x 1CP02K
Hardware Kit W790/799/1100/1250 x 1MH134
Hardware Kit S425/S430/S450/S483 x 1MH108
Hardware Kit F703K/753K/903K/1003K x 1MH138
Foam Pads for Plate – Kraken Modular System x 1MH144
Flat Head Screws Hex M8x30 x 4
Zinc Anode x 1
Inox Bar for Anode x 1
Cylindrical Head Screws M4x10 x 2
Socket Screws Cylindrical Head M6x25 x 2
Reviews
There are no reviews yet.