Description
SABFOIL M103K
SABFOIL M103K This kit is ideal for Wing-Foil, in particular for Race and Freeride in light-moderate winds.
Thanks to the Kraken Modular System connection system, maximum compatibility with all components of the same SABFOIL range is guaranteed, so that you can upgrade your setup at any time, without any problems.
The kit consists of:
- Mast: M103K – 1030 mm
- Front Wing: W1000 – 987 cm2
- Stabilizer: S399 – 207 cm2
- Fuselage: F713K – 713 mm
- Mast Plate: P02K
It is possible to upgrade your kit thanks to the Quick Release System (Q01K) patented by SABFOIL and sold separately. Thanks to it you can assemble and disassemble your hydrofoil in a few seconds, avoiding at the same time losing the configuration on the board.
Microfractures on the mast caused by accidental collisions or by freestyle use of this race-specific foil can cause the mast to break suddenly. For this reason, we recommend avoiding jumps and checking the mast carefully after a collision.
Dimensions & Advanced specs
| Mast – Height | 1030 mm |
|---|---|
| Front Wing – Span | 1000 mm |
| Front Wing – Surface | 987 cm2 |
| Front Wing – Root Chord | 135 mm |
| Front Wing – Aspect Ratio | 10,1 |
| Stabilizer – Span | 400 mm |
| Stabilizer – Surface | 207 cm2 |
| Stabilizer – Root Chord | 64 mm |
| Stabilizer – Aspect Ratio | 7,7 |
| Fuselage – Length | 713 mm |
| Board Connection Type | Plate |
Content
Carbon Mast 103 cm x 1M103K
Front Wing 1000 – 987 cm2 x 1W1000
Stabilizer 399 – 207 cm2 x 1S399
Fuselage 713 – Kraken Modular System x 1F713K
Mast Plate – Kraken Modular System x 1P02K
Hardware Kit W449/W525/W607/W671/W1000/W1110 x 1MH130
Hardware Kit S330Y/370/376/399/400 x 1MH107
Adaptor for Small Chord Stabilizers – 0° x 1MH122
Hardware Kit F603K/653K/713K x 1MH139
Foam Pads for Plate – Kraken Modular System x 1MH144
Flat Head Screws Hex M8x30 x 4
Conical Washers x 4
Allen Keys, Torx Key and Grease x 1MH137
Shims -0,5°/-1°/-1,5°/-2°/-2,5°/-3° x 1MHW060
Reviews
There are no reviews yet.