SABFOIL M93K – W699 – S399 – F703K

Description

This kit is ideal for Kite-Foil, in particular for Freeride and Freestyle. The high lift make it a good choice also for beginners who wants to try Kite-Foil in low-moderate winds.

Thanks to the Kraken Modular System connection system, maximum compatibility with all components of the same SABFOIL range is guaranteed, so that you can upgrade your setup at any time, without any problems.

The kit consists of:

• Mast: M93K – 930 mm
• Front Wing: W699
• Stabilizer: S399 – 207 cm2
• Fuselage: F703K – 703 mm
• Mast Plate: P02K

It is possible to upgrade your kit thanks to the Quick Release System (Q01K) patented by SABFOIL and sold separately. Thanks to it you can assemble and disassemble your hydrofoil in a few seconds, avoiding at the same time losing the configuration on the board.

Dimensions & Advanced specs

Mast – Height	930 mm
Front Wing – Span	699 mm
Front Wing – Surface	850 cm2
Front Wing – Root Chord	170 mm
Front Wing – Aspect Ratio	5,75
Stabilizer – Span	399 mm
Stabilizer – Surface	207 cm2
Stabilizer – Root Chord	64 mm
Stabilizer – Aspect Ratio	7,7
Fuselage – Length	703 mm
Board Connection Type	Plate

Content

−

Carbon Mast 93 cm x 1M93K

Front Wing 699 – 880 cm2 x 1W699

Stabilizer 399 – 207 cm2 x 1S399

Fuselage 703 – Kraken Modular System x 1F703K

Mast Plate – Kraken Modular System x 1P02K

Hardware Kit W790/799/1100/1250 x 1MH134

Hardware Kit S330Y/370/376/399/400 x 1MH107

Adaptor for Small Chord Stabilizers – 0° x 1MH122

Hardware Kit F703K/753K/903K/1003K x 1MH138

Foam Pads for Plate – Kraken Modular System x 1MH144

Flat Head Screws Hex M8x30 x 4

Conical Washers x 4

Allen Keys, Torx Key and Grease x 1MH137

Shims -0,5°/-1°/-1,5°/-2°/-2,5°/-3° x 1MHW060